How to Prepare

POOL SITE
Pick out the area where you want the pool before the installation date. This area needs to meet your township/county codes (proper distances away from property lines and any permanent structures). Do you have a 6 ft. opening for ground leveling equipment? Is there any thing in the site such as trees or tree stumps? Please inform our office of any obstructions in the site so we can make the proper provisions for the installation.

POOL
Is the pool and all of its parts in stock? If not, when will you receive them? You will need to know this information when calling to schedule the installation date.

PERMITS
A permit may be necessary for the pool, this usually depends on the pool size (smaller pools may not apply). This is the homeowners responsibility to obtain. Look in the blue pages of your local phone book under permits and zoning. Call ahead to find out what information you will need to provide them, this information varies depending on your township/county. We recommend calling the township/county as soon as you purchase the pool, to prevent any delays with the installation date.

ELECTRIC
You will need to have an electrician install a ground fault breaker for the filter system. This should be scheduled after the pool is installed

SAND
This is used as a base to cushion the liner. How much sand is needed? This depends on the pool size, our office will inform you on how much sand is required when you schedule the installation. In some areas we can take care of the ordering and delivery for you.

WATER
Do you have public water or well water? If you have public water the pool can be filled with your hose. If you have well water you may want to consider having the water trucked in. Our office can provide you with referrals and explain how to schedule the water.

FILTER
Know where you want your filtration system placed, and mark that spot.

TIP - Try to place the filter system on the same side of the pool that your home’s main electric box is located. To provide a straight run from one to the other. This will make the installation easier for the electrician.

Customer Responsibility

FILLING THE POOL
At the end of the installation, we will begin filling the pool to set the liner in place, this only requires a few inches of water you will need to make sure the pool is then filled to the proper water level (Installer will show you the proper water level).

EXCESS SAND
When scheduling the installation our office will tell you how much sand to order, depending on what the pool size is. We recommend you order that amount unless you have plans for the excess. If there is any sand left over it is your responsibility to clean up and remove. It is better to have too much than not enough sand.

GROUND MATERIALS
If any ground leveling is needed for the installation you will have a pile of left- over ground materials; we will pile this material in any area of the yard that you request, within reasonable distance. In most area’s we can arrange the removal of the leftover ground materials.

BACK-FILLING THE POOL
The entire bottom rim of the pool will need to be covered as soon as the pool is filled to the proper water level. Do not begin back-filling before the pool is completely filled. We recommend you place a heavy plastic down before back- filling. Drape the plastic up on the pool wall (8 inches) then place the material you plan to use for back fill down (dirt, mulch, rocks) the plastic will stop the water from rain or splashing from washing away the sand, causing sink holes in the sand, it will also protect the pool wall (some materials can damage the wall).

How to Survey for your Pool Installation

STEP 1
Stake out the pool in a desired area of the yard. Place stakes and string lines as indicated. (See illustrations for round or oval pools)

STEP 2
Locate the most obvious high stake in the area staked out.

STEP 3
Tie a string to the highest stake flush with the ground.

STEP 4
Run the string line to the most obvious low stake in the staked out area. Now put a line level on the string, pull the string tight, to make it level, and tie it to the lowest stake, making sure the string stays level.

STEP 5
Use a tape measure to measure the distance from the ground to the leveled string at the lowest stake. This is approximately how far out of level your yard is. You may have to measure several different areas to get a good idea how far out of level your yard is.

The Pool Location

ROUND POOLS
Stake out the pool area 4 ft. larger all the way around than the actual pool size. EXAMPLE: A 24 ft. round pool would be staked out 16 ft. from the center stake to all other stakes to give you a 32 ft. diameter.

OVAL POOLS
Make the staked out area a rectangle. For the length add an additional 8 ft. (4 ft. at each end). To get the width measurement add together the pool’s width + side supports + 8 ft. for water run off (4 ft. on each side). If you are unsure of the side supports size contact the dealer where you purchased the pool. EXAMPLE: Measuring for a 15’ x 24’ oval pool with side supports extending 3 ft. on each side. To get the width add the three measurements together 15 ft. width + 6 ft. for side supports + 8 ft. for water run off = 29 ft. total width. Then to get the length add 24 ft. + 8 ft. = 32 ft. total length. Therefore a 15x24 pool will need a 29 ft. x 32 ft. area.

Things to Consider in Selecting the Pool Location

Tree Stumps
Small Trees Bushes / Shrubs
Clothesline Poles
Swing Sets
Other Objects

If you have any of the items listed above in the area where the pool is going, we strongly suggest having them completely removed before the installation date.

TIP - If you have a tree stump(s) it is best to have them pulled out. If this can not be done, have the stump(s) ground down as far as possible.

We have the equipment to get the Job done!

SKID STEER This machine is used on larger pools. For round pools 21 ft. or larger. For oval pools 12` x 21` or larger. We need a 6ft. opening for the bobcat to get into the back yard.
SMALL SKID STEER & GRAVELY TRACTOR We use these machines on small pools. For round pools 18 ft. or smaller. For oval pools 12'x18' or smaller. The gravely machine can fit through a standard gate opening (3 ft. Not available in all areas.). The small Bobcat Skid Steer can fit through a 42" gate opening.

The Finished Excavation Site

The site will need to be excavated larger than the actual pool size. Our standard is to excavate the site 4 ft. larger all the way around the entire pool. However this may be more/less than what your township or county requires. There is no uniform code between townships/counties. You can get this information by contacting your township or county zoning office.

IMPORTANT: Our Foreman MUST know this information for the pool to pass inspection.The high cut edge of your yard has to be back cut on an angle, so there is not a severe drop off. (see illustration below) You may need to build a retaining wall to protect the exposed earth. This will depend on how much ground leveling is needed.

"I would not change anything, the crew was very gracious and personable, would highly recommend your company to others Great job! Thank you"

M. Carducci Wilmington, DE
18’ DF

"The installers were courteous, informative, and professional; I would definitely recommend these installers to my friend’s outstanding job!! Thank you"

J. Windward, Elkton, MD
24’ Round

"Everyone involved from the sale of the pool to the installation was great. As a consumer, your company and all involved should show other business how it is done, Great work!! Thank you"

K. Gladfelter, York, PA
24’ Round Pool

"Foreman and crew worked hard and non stop, it was a hot day and they worked very quickly and in a professional manor, your company has a good crew in these guys."

R. Ivone, Lancaster, PA
15x30’ Oval Pool

"Thank you, the office staff was extremely helpful and your installers worked very hard!!We are very happy with the pool installation Thanks!"

A. Drobrinski, Kent County, DE
18x29’ Oval Teardrop

"We were very pleased with the service and professionalism, they came when they said they were going to come and the office staff was very friendly. Thank you!"

J. Bargain, Newark, DE
18’ Round Pool

"Everyone at C&D’S Installers was helpful and courteous and professional thanks for a job well done!"

K. Flinch, York, PA
27’Round Pool

"Wouldn't change anything, from the 1st phone call inquiring to the completed job we were very impressed and would definitely recommend your company to anyone who needs a pool installed."

G.Steele, Glen Burnie MD
18x 33 Decks, Fence, Walk.

"I would change nothing. C&D'S has the art of above ground pool installation perfected, Many thanks to the foreman & his crew for a perfect job, after Landscaping is completed, I will send you photographs of the pool to be used as a reference for future customers, again , many thanks for a job well done!"

M. Pumphrey, Glen Burnie, MD.
18'x 34' Oval Pool

"C&D'S, if other services were as good as C&D'S Installers we would live in a different world! Thanks so much!"

M. Tolmie, Newark, DE.
21' Round Pool

"There were no faults to be found with the installation process. The crew was dressed well & respectful to the property & my family. The foreman directed his men like a well oiled machine& taught me everything I needed to know about my pool. Great job all around to C&D'S!!!"

D. Oakes, Dover, PA.
18' Round Pool

"Crew from C&D'S Installers did great work, and took pride in their work. Job well done !! Thank you."

L. Snugs, Forestville, MD.
18' Deck & Fence Round Pool

"The group of installers that came to our house were courteous, professional and hardworking. It was an extremely hot day and they worked steadily. They genuinely seemed to enjoy their work and take pride in it. A great crew, you are fortunate to have employees such as these to represent your company. Thank you for a job well done!!"

S. Mays, Reisterstown, MD.
18'x 33' Oval Pool

"Not one thing I would change: they work very well together, they all did their jobs like a well oiled machine, they had the pool setup in no time and worked excellent together, Thank you!"

B. Rogers, Dover, PA.
24' Round Pool

"It would be hard to change anything, the crew were friendly & very, very hard working. They did an excellent job. I wish your ratings had a 10 instead of 1-3 because they deserve a 10. Thank you!"

D. Dougherty, Pasadena, MD.
24' Round Pool

"The office was a delight to speak with!!, The crew was also very considerate & the foreman was very helpful and answered all questions. Thank you!"

C. Flanary, Dundalk, MD.
18' Round Pool

"Everything went very good, No problems, the crew was very nice and very professional. Thank you!"

S. Kirby, Stevensville, MD.
27' Round Pool

"Crew did a great job. I was very satisfied and I am enjoying my pool for the summer. Thank you!"

J. Andreone, Middle River, MD
8'x12' Oval Pool

"The guys were great. Even when they discovered we had the wrong pump, they were very understanding when I had to run back to the store. They were very informative. I will recommend C&D'S to anyone I know getting a pool. Thank you!"

J. Jorden, Newark, DE
18' Round Pool

"Absolutely nothing, very professional and courteous to me and his crew, they worked like a well oiled machine together, the foreman worked as hard as his crew. Impressive!! Thank you !!"

B. Morse, New Castle, DE
15' Round Pool

"Entire Process went very smoothly, the foreman and crew worked hard and did a great job! Thank you!"

M. Jackson, Rising Sun, MD
18' Round Pool

"The crew that put up our pool were fantastic! They were very knowledgeable, polite and efficient workers, clean up was great. Thank you!"

T. Vally, Manheim, PA
21' Round Pool

"I am very satisfied with my installation and would recommend C&D'S Installers to any pool owner. Thank you !!"

J. Cascioli, Halethorpe, MD
18' Round Pool

"In meeting the crew, I felt they represented a quality of workmanship & were very pleasant, don't change anything with your staff. Thank you !"

B. Brady, Huntingtown, MD
21' Round Pool

"I had the same person that did the estimate that did the install, he was second to no one, I would recommend him & C&D'S to anyone, He did a great job and his crew was outstanding!! It was a pleasure to have such a crew work here, Thank you for sending them."

M. Parrott, Annapolis, MD
24' Round Pool

"I would not change anything foreman and his tem did a great job, would recommend to friends and family, Thank you!"

M. Ginevra, Hanover, PA
24' Round Pool

"Quickly put pool up which was great, very reliable, easy to schedule, and arrived on time, Thank you!! "

E. Gordon, Parkville, MD
15'x 30' Oval Pool

"I enjoyed the installers and the office staff, there is nothing I would change and I wish I would of got the pool earlier. Thank you !!"

D. Dunlap, Elkton, MD
18'x 33" Oval Pool

"The scheduler was very professional, knowledgeable, great to work with, the installation crew was professional, courteous and extremely diligent about their work, it is refreshing to see such good work ethic, the crew also worked together as a team encouraging and helping each other, the Forman was articulate and very knowledgeable overall it was a delightful experience, and I will recommend C&D’S Installers to others, thank you!"

J. Hickey, Elkton, MD
27’ Round Pool